Hyundai Elantra: General Information / Specifications
| Specifications |
| Item | Specification | |
| Type | Electric Power Steering System | |
| Steering gear | Type | Rack & Pinion |
| Rack stroke | 154±1 mm (6.07±0.04 in) | |
| Steering angle (Max.) | Inner | 39.4°+0.5° / -1.5° |
| Outer | 32.6° | |
| Item | Tightening torque (kgf.m) | |||
| N.m | kgf.m | lb-ft | ||
| Hub nuts | 107.9 ~ 127.5 | 11.0 ~ 13.0 | 79.6 ~ 94.0 | |
| Steering wheel lock nut | 44.1 ~ 49.0 | 4.5 ~ 5.0 | 32.5 ~ 36.2 | |
| Steering column mounting | Bolt | 53.9 ~ 58.8 | 5.5 ~ 6.0 | 39.8 ~ 43.4 |
| Nuts | 25.0 ~ 29.4 | 2.5 ~ 3.0 | 14.5 ~ 21.7 | |
| Steering column to Universal joint | 49.0 ~ 58.8 | 5.0 ~ 6.0 | 39.8 ~ 43.4 | |
| Bolt connecting universal joint to pinion | 32.4 ~ 38.3 | 3.3 ~ 3.8 | 23.9 ~ 27.5 | |
| Tie rod end castle nut | 24.5 ~ 34.3 | 2.5 ~ 3.5 | 18.1 ~ 25.3 | |
| Lower arm to front axle | 58.8 ~ 70.6 | 6.0 ~ 7.2 | 43.4 ~ 52.1 | |
| Steering gear box to sub frame | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 | |
| Stabilizer link nut | 98.1 ~ 117.7 | 10.0 ~ 12.0 | 72.3 ~ 86.8 | |
| Sub frame mounting bolts & nuts | 156.9 ~ 176.5 | 16.0 ~ 18.0 | 115.7 ~ 130.2 | |
Troubleshooting
Troubleshooting
Trouble SymptomCause of the symptomRemedyExcessive play in steeringLoose U-joint boltRetighten or replace as necessaryLoose yoke plugRetightenLoose steering gear mounting boltsRe ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Passenger Airbag (PAB) Module Description and Operation
Description
Passenger Airbag (PAB) module is located in the passenger
crash pad. This PAB contains 2 firing squibs of airbag. Depending of
crash speed or the tightening of seat belt, it is decided a timing about
both 2 firing squibs of airbag.
•
Never attempt to ...
Hyundai Elantra AD (2016-2020) Service Manual: Rear Glass Defogger Printed Heater Repair procedures
Inspection
•
Wrap tin foil around the end of the voltmeter test lead to
prevent damaging the heater line. Apply finger pressure on the tin foil,
moving the tin foil along the grid line to check for open circuits.
1.
Turn on the defogger switch and use a voltme ...
