Hyundai Elantra: Auto Lighting Control System / Schematic Diagrams

Circuit Diagram

Components and Components Location
Component Location 1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Tail lamps5. BCM (Body Control Module) ...

Description and Operation
Description It's a system that uses illumination sensor to automatically turn ON the tail lamp and head lamp based on the change in surrounding environment's illumination condition. It activate ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the driver airbag module by putting in a flat tool (O5mm) into the guide hole and then press the spring. 3. Release the connector locking pin, then disconnect the driver ...

Hyundai Elantra AD (2016-2020) Service Manual: Instrument Cluster Components and Components Location
Components [General Standard Type (3.5" OLED)] [MONO Type (3.5")] [General Super Vision Type (4.2" LCD)] Connector Pin Information NoDescriptionNoDescription1GND21Trip switch (-)2Illumination (-)22Trip switch 1 (+)3Rheostat switch (Down)_Input23Trip switch 2 (+)4Rheostat switch (Up)_Input24-5 ...

© 2018-2022 www.helantraad.com