Hyundai Elantra: Rear Seat / Rear Seat Folding Lever Components and Components Location

Hyundai Elantra AD (2016-2020) Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Folding Lever Components and Components Location

Components

1. Rear seat folding lever


Rear Back Armrest Repair procedures
Replacement     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Use a plastic panel ...

Rear Seat Folding Lever Repair procedures
Replacement 1. Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow. 2. Loosen the mounting clips and bolts, remove the rear seat folding lever (A). ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Inhibitor Switch Description and Operation
Description • The inhibitor switch mounted on the upper of transaxle and connected with shifter lever. • The inhibitor switch has four points of contact and it makes the signals(S1, S2, S3, S4). • The inhibitor switch signals delivered at the TCM according to control of t ...

Hyundai Elantra AD (2016-2020) Owners Manual: Checking the tire inflation pressure
1. After driving approximately 4~6 miles (7~10 km or about 10 minutes), stop at a safe location. 2. Connect hose (9) of the compressor directly to the tire valve. 3. Plug the compressor power cord into the vehicle power outlet. 4. Adjust the tire inflation pressure to the recommended tire inf ...

© 2018-2026 www.helantraad.com