Hyundai Elantra: Brake System / Master Cylinder Components and Components Location

Vacuum Pump Repair procedures

Removal 1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Remove the timing chain. (Refer to Timing System - "Timing Chain") 3. Remove the ...

Master Cylinder Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery. (Refer to Engine Electrical System - "Battery") 3. Remove the ECM (A). 4. Lo ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: BJ Boot Repair procedures
Removal 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - "Front Driveshaft") 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - "TJ Joint") 3. Remove the Dynamic damper. (Refer to Driveshaft Assembly - "Dynamic Damper") 4. Using a plier or flat-tip ...

Hyundai Elantra AD (2016-2020) Service Manual: Radiator Repair procedures
Inspection Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Apply a pressure of 93.16 ~ 122.58 kPa (0.95 ~ 1.25 kgf/cm?, 13.51 ~ 17.78 psi). 3. Check for a drop in pressure. 4. If the pressure drops, re ...