Smart Key Diagnostic Repair procedures
SpecificationsHyundai Elantra AD (2016-2020) Service Manual: Refrigerant Line Repair procedures
Replacement
1.
If the compressor is marginally operable, run the engine at
idle speed, and let the air conditioning work for a few minutes, then
shut the engine off.
2.
Disconnect the negative (-) battery terminal.
3.
Recover the refrigerant with a recovery / charging station.
...
Hyundai Elantra AD (2016-2020) Service Manual: Idler Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the idler (A).
Tightening torque :
39.2 ~ 49.0N.m (4.0 ~ 5.0kgf.m, 28.9 ~ 36.2lb-ft)
3.
Install in the reverse order of removal.
Inspection
Check the idler for excessive oil le ...