Hyundai Elantra: Ignition System / Ignition Coil Description and Operation

Description
An ignition coil is an induction coil in an engine's ignition system which transforms the battery's low voltage to the high voltage needed to create an electric spark in the spark plugs to ignite the fuel. Coils have an internal resistor while others rely on a resistor wire or an external resistor to limit the current flowing into the coil from the battery 12 V supply.
Repair procedures
On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.     • If a DTC is present, perform troubleshooting in accordance with the ...

Ignition Coil Specifications
Specification ItemSpecification Primary Coil Resistance (?)0.61 ± 15% [20°C (68°F)]Secondary Coil Resistance (k?)7.5 ± 15% [20°C (68°F)] ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Delivery Pipe Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")     • When removing the fuel pump relay, a Diagnostic Tr ...

Hyundai Elantra AD (2016-2020) Service Manual: Description and Operation
Cruise Control The cruise control system is engaged by the cruise "ON/OFF" main switch located on the right-hand side of steering wheel column. The system has the capability to cruise, coast, accelerate and resume speed. It also has a safety interrupt, engaged upon depressing brake or shif ...

© 2018-2025 www.helantraad.com