This display shows the trip distance (1), the average fuel economy (2), and the total driving time (3).
The information is combined for each ignition cycle. However, when the engine has been OFF for 4 hours or longer the Drive Info screen will reset.
To reset the details, press and hold the OK button when viewing the Drive Info. The trip distance, the average fuel economy, and total driving time will reset simultaneously.
The driving information will continue to be counted while the engine is still running (for example, when the vehicle is in traffic or stopped at a stop light).
Information
The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average fuel economy will be recalculated.
Hyundai Elantra AD (2016-2020) Service Manual: Sunroof Sunshade Repair procedures
Replacement
1.
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
2.
After loosening the mounting screws, remove the drip rail assembly (A).
3.
After loosening the mounting screws, disengage the rear drip (A).
4.
Remove the stopper (A) by pushing it in the directi ...
Hyundai Elantra AD (2016-2020) Service Manual: Windshield Deicer Repair procedures
Inspection
1.
Remove the cowl top cover.
(Refer to Body - "Cowl Top Cover")
2.
Disconnect the windshield deicer connector.
3.
Check for continuity between the terminals of deicer lines.
4.
Turn the ignition switch ON and the windshield deicer switch
ON, then measure the voltage be ...