Hyundai Elantra: Blower / Climate Control Air Filter Repair procedures

Replacement
1.
Remove the stopper (B) from the glove box (A).

2.
Disconnect the air damper (A) from the glove box (B).

3.
Remove the filter cover (A) by pressing the knob.

4.
Replace the air filter (A) with a new one according to the direction of air filter.

   
•
To remove the filter easily, press the right side inward then pull out the filter.
•
In case of driving in an air-polluted area or rugged terrain, check and replace the air filter as frequently as possible.
5.
To intall, reverse the removal procedure.
Climate Control Air Filter Description and Operation
Description The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventio ...

Intake Actuator Components and Components Location
Components Location 1. Intake actuator ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Trunk Trim. Repair procedures
Repair procedures Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • When removing the interior ...

Hyundai Elantra AD (2016-2020) Service Manual: Sub Frame Repair procedures
Removal 1. Loosen the wheel nuts slightly. 2. Raise the vehicle, and make sure it is securely supported. 3. Remove the front wheel and tire (A) from front hub. Tightening torque : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)     • Be careful not ...

© 2018-2026 www.helantraad.com