Hyundai Elantra: Charging System / Battery Sensor Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Engine Electrical System / Charging System / Battery Sensor Description and Operation

Description

Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as there diverse sensors giving a variety of information. Battery sensor is mounted on battery (-) terminal. It transmits battery voltage, current, temperature information to ECM. ECM controls generating voltage by duty cycle based on these signals.

Battery Troubleshooting

Troubleshooting ...

Battery Sensor Repair procedures

Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolts (B). Installation ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Line Pressure Control Solenoid Valve Description and Operation
Description • Line pressure control solenoid valve is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the line pressure. ...

Hyundai Elantra AD (2016-2020) Service Manual: Windshield Deicer Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to Body - "Cowl Top Cover") 2. Disconnect the windshield deicer connector. 3. Check for continuity between the terminals of deicer lines. 4. Turn the ignition switch ON and the windshield deicer switch ON, then measure the voltage be ...