Hyundai Elantra: Exterior Care / Aluminum wheel maintenance
The aluminum wheels are coated with a clear protective finish.
NOTICE
- Do not use abrasive cleaner, polishing compound, solvent, or wire brushes on aluminum wheels.
- Clean the wheel when it has cooled.
- Use only a mild soap or neutral detergent, and rinse thoroughly with water. Also, clean the wheels after driving on salted roads.
- Do not wash the wheels with high-speed car wash brushes.
- Do not use any cleaners containing acid or alkaline detergents.
Bright-metal maintenance, Underbody maintenance
Bright-metal maintenance
To remove road tar and insects, use a tar remover, not a scraper or other
sharp object.
To protect the surfaces of brightmetal parts from corrosion, apply a coating
...
Corrosion protection
Protecting your vehicle from corrosion
By using the most advanced design and construction practices to combat corrosion,
HYUNDAI produces cars of the highest quality. However, this is only part of ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Compressor oil Repair procedures
Oil Specification
1.
The HFC-134a system requires synthetic (PAG) compressor oil
whereas the R-12 system requires mineral compressor oil. The two oils
must never be mixed.
2.
Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the model of compress ...
Hyundai Elantra AD (2016-2020) Service Manual: Transaxle Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
3.
Disconnect the solenoid valve connector (A).
4.
Measure resistance between sensor signal terminal and sensor ground terminal.
5.
Check that the resistance is within the specification.
&nbs ...