Replacement |
1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly") |
2. |
Remove the sunroof sunshade.
(Refer to Sunroof - "Sunroof Sunshade") |
3. |
Down the slide by pushing it and then remove the drip link assembly (A). |
4. |
Separate the drip link (B) and guide (A). |
5. |
Remove the shoe (A). |
6. |
Separate the guide assembly (A) and the cable (B) by pushing them in the direction of the arrow. |
7. |
To install, reverse the removal procedure.
|
Hyundai Elantra AD (2016-2020) Service Manual: Heater Unit Repair procedures
Replacement
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape around the
related parts, to prevent damage.
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a ...
Hyundai Elantra AD (2016-2020) Service Manual: Blower Motor Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.
3.
Replace the blower motor if it is proved that there is a problem with it.
Replacem ...