Hyundai Elantra: Front / Rear Parking Assist System / Specifications

Specification
Item
Specification
Ultrasonic sensor
Voltage rating
DC 12V
Detecting range
F PAS : 100 / 60 /30cm
R PAS : 120 / 60 /30cm
Operation voltage
DC 9 ~ 16V
Operation current
MAX 350mA
Operation temperature
-30°C ~ +80°C (-22°C ~ +176°C)
Operation frequency
48 ± 5KHz
Number of sensors
8EA

Front / Rear Parking Assist System
...

Components and Components Location
Component Location 1. BCM (Body Control Module)2. Ultrasonic sensor     • Rear parking assist control unit function is built in BCM (Body Control Module). ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Front Rear Parking Assist System Switch Repair procedures
Removal     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Use a plastic panel removal tool to remove interior ...

Hyundai Elantra AD (2016-2020) Service Manual: Canister Close Valve (CCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specification. Specification : Refer to "Specification" 5. Disconnect the vapor hose connected with ...

© 2018-2026 www.helantraad.com