Hyundai Elantra: SRSCM / Seat Belt Buckle Switch (BS) Components and Components Location
| Components |
| 1. Seat Belt Buckle Switch (BS) |
Side Impact Sensor (SIS) Repair procedures
Removal
Pressure Side Impact Sensor
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
Before disconnectin ...
Seat Belt Buckle Switch (BS) Description and Operation
Description
•
The SRSCM should detect the condition of seat belt buckles (BS) of the driver and passenger seats.
•
The SRSCM provides two pins to each side, in order to enter
the con ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Blower Resistor (Manual) Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad center panel.
...
Hyundai Elantra AD (2016-2020) Service Manual: Ambient Temperature Sensor Description and Operation
Description
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor; resistance will increase with lower temperature, and
decrease with higher temperature.
The sensor output will be used for discharge tem ...
