Hyundai Elantra: Airbag Module / Passenger Airbag (PAB) Module Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module Description and Operation

Description

Passenger Airbag (PAB) module is located in the passenger crash pad. This PAB contains 2 firing squibs of airbag. Depending of crash speed or the tightening of seat belt, it is decided a timing about both 2 firing squibs of airbag.

•	Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using a specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Passenger Airbag (PAB) Module Components and Components Location

Components 1. Passenger Air Bag (PAB) ...

Passenger Airbag (PAB) Module Repair procedures

Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. (Refer to Body - "Glove Box Upper Cover Assembly") ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Output Speed Sensor Repair procedures
Inspection 1. Using the GDS, check the input/output speed sensor waveforms. A. Turn OFF the ignition switch. B. Connect the GDS to the Data Link Connector(DLC) on the lower crash pad. C. Ignition "ON" & Engine "ON". D. Check the input/output speed sensor waveforms at high spe ...

Hyundai Elantra AD (2016-2020) Service Manual: Heater & A/C Control Unit (Manual) Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box upper cover assembly. (Refer to Body - "Glove Box Upper Cover Assembly") 3. Loosen the mounting screws and remove the crash pad center lower cover [LH](A). 4. After loosening the mounting screws, r ...