Hyundai Elantra: Airbag Module / Passenger Airbag (PAB) Module Components and Components Location
| Components |
| 1. Passenger Air Bag (PAB) |
Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the driver airbag module by putting in a flat tool (O5mm) into the guide h ...
Passenger Airbag (PAB) Module Description and Operation
Description
Passenger Airbag (PAB) module is located in the passenger
crash pad. This PAB contains 2 firing squibs of airbag. Depending of
crash speed or the tightening of seat belt, it is deci ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Brake Line Repair procedures
Removal
1.
Disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level switch connector.
3.
Remove the brake fluid from the master cylinder reservior with a syringe.
•
Do not spill brake fluid on the vehicle, it may damage the
paint; if br ...
Hyundai Elantra AD (2016-2020) Service Manual: Crankshaft Position Sensor (CKPS) Description and Operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft
position and is one of the most important sensors of the engine control
system. If there is no CKPS signal input, the engine may stop because of
CKPS signal missing. This sensor is installed on the cylinder block or
the ...
