Hyundai Elantra: Engine Control System / Knock Sensor (KS) Specifications
| Specification |
| Item | Specification |
| Capacitance (pF) | 850 ~ 1,150 |
Knock Sensor (KS) Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise and can cause engine damage. Knock Sensor (KS) is
installed on the cylinder block and senses engine knockin ...
Knock Sensor (KS) Schematic Diagrams
Circuit Diagram
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Hazard Lamp Switch Repair procedures
Inspection
1.
Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch.
Manual (Auto)
Removal
•
Wrap the protective tape on the tool to disassemble with the screwdriver or remover.
•
e caution in keeping ...
Hyundai Elantra AD (2016-2020) Service Manual: Transaxle Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
3.
Disconnect the solenoid valve connector (A).
4.
Measure resistance between sensor signal terminal and sensor ground terminal.
5.
Check that the resistance is within the specification.
&nbs ...
