Hyundai Elantra: Interior Trim / Center Pillar Trim Components and Components Location

Hyundai Elantra AD (2016-2020) Service Manual / Body (Interior and Exterior) / Interior Trim / Center Pillar Trim Components and Components Location

Component Location

1. Center pillar lower trim
2. Center pillar upper trim

Front Pillar Trim Repair procedures
Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Center Pillar Trim Repair procedures
Replacement [Center pillar lower trim]     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Input Speed Sensor Repair procedures
Inspection 1. Using the GDS, check the input/output speed sensor waveforms. A. Turn OFF the ignition switch. B. Connect the GDS to the Data Link Connector(DLC) on the lower crash pad. C. Ignition "ON" & Engine "ON". D. Check the input/output speed sensor waveforms at high spe ...

Hyundai Elantra AD (2016-2020) Service Manual: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Specifications ShapeItems Specifications Control current(voltage) [mA] 0 ~ 1100 Supply pressure [kpa (kgf/cm?, psi)] 1569.06 (16, 227.57) Control pressure [kpa (kgf/cm?, psi)] 0 ~ 1569.06 (0 ~ 16, 0 ~ 227.57)  Internal resistance(?) 5.0 ~ 5.6 ...

© 2018-2026 www.helantraad.com