Hyundai Elantra: AVN System / AVN Antenna Repair procedures

Removal
Roof Antenna
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim.
(Refer to Body - "Roof Trim Assembly")
3.
Disconnect the roof antenna connector (A).

4.
Remove the roof antenna (A) after loosening a nut (B).

Installation
Roof Anenna
1.
Connect the roof antenna connectors.
2.
Install the roof trim assembly.
   
•
Make sure that the cables and connectors are plugged in properly.
•
Check the audio system.
AVN Antenna Components and Components Location
Components [SXM] [SXM + GPS] [SXM + GPS + LTE] ...

Speaker Repair procedures
Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws is removed and the wiring connector i ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Knock Sensor (KS) Specifications
Specification ItemSpecificationCapacitance (pF)850 ~ 1,150 ...

Hyundai Elantra AD (2016-2020) Service Manual: Description and Operation
Description Burglar Alarm State [B/A State] B/A StateDescriptionDISARM 1. In "DISARM" state, no vehicle start inhibition. So, when door, hood, or Tailgate is opened, there is no alarm sound and flashing. 2. If the battery is disconnected while the state is not "ARM/ARMWAIT/ALARM/REAR ...

© 2018-2026 www.helantraad.com