Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing") |
3. |
Remove the AFLS unit (A) after removing connector and nuts (2EA). |
Installation |
1. |
Install the AFLS unit after connecting the connector. |
2. |
Install the glove box housing. |
3. |
Connect the negative (-) battery terminal. |
Hyundai Elantra AD (2016-2020) Service Manual: Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Measure resistance between sensor signal terminal and sensor ground terminal.
5.
Check that the ...
Hyundai Elantra AD (2016-2020) Service Manual: Memory power seat unit Components and Components Location
Components
NoConnecter AConnecter BConnecter CConnecter D1-Batt (+)Slide switch signal (Forward)-2Reclining motor (Forward)GNDReclining switch signal (Forward)-3Height motor (Up)Batt (+)Front tilt switch signal (Up)-4--Reclining switch signal (Forward)Body CAN (High)5Slide motor (Forward)GND-Bo ...