Hyundai Elantra: Adaptive Front Lighting System / Adaptive Front Lighting System Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Body Electrical System / Adaptive Front Lighting System / Adaptive Front Lighting System Description and Operation

Description

AFLS Unit (ECU)

AFLS located in Cockpit Module is provided information of vehicle. (steering wheel signal,vehicle speed, inclination of vehicle)

Based on provided information, it calculates algorithm and adjust Low beam of H/Lamp.

It transmits driving information by using LIN protocol, it is operated in Fail-safe reaction mode In case system failure occurred.

Repair procedures

Inspection Initialization and diagnosis sequence by using diagnostic equipment Below content summarize the procedure for A/S using Diagnostic equipment Download Parameter 1. Select "AFLS" menu ...

Adaptive Front Lighting System Repair procedures

Removal AFLS Unit 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") 3. Remove the AFLS unit (A) after removing conne ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the knock sensor connector (A). 3. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold") 4. Remove the installation bolt (A), and then remove the sens ...

Hyundai Elantra AD (2016-2020) Owners Manual: Adjusting the Sensitivity of Smart Cruise Control
The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted. Go to the 'User Settings → Driver Assistance → SCC Reaction → Fast/Normal/Slow' on the LCD display. You may select one of the three stages you prefer. • Fast: Veh ...