Hyundai Elantra: Valve Body System / Valve Body Components and Components Location

Components Location

1. Solenoid valve support bracket
2. Solenoid valve support bracket (Directly solenoid)
3. Line Pressure Control Solenoid Valve
4. Torque Convert Control Solenoid Valve (T/CON)
5. ON/OFF solenoid valve
6. Overdrive Clutch Control Solenoid Valve (OD/C)
7. Underdrive Brake Control Solenoid Valve (UD/B)
8. 35R Clutch Control Solenoid Valve (35R/C)
9. 26 Brake Control Solenoid Valve (26B)
10. LR/B pressure flow hole
11. UD/B pressure flow hole
12. Accumulator

Valve Body Description and Operation
Description The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of press ...

Valve Body Repair procedures
Replacement     If necessary replace the valve body or solenoid valves, hydraulic adjustment is needed, replace the automatic transaxle assembly. After the automatic transaxl ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Memory power seat switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver door trim. (Refer to Body - "Front Door Trim") 3. Disconnect the memory power seat switch connector (A). 4. Remove the memory power switch (A) after disengaging the mounting clips. Installation 1. Ins ...

Hyundai Elantra AD (2016-2020) Service Manual: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check that the ...

© 2018-2021 www.helantraad.com