Hyundai Elantra: Blind Spot Detection System / Specifications
| Specifications |
| Items | Specification |
| Rated voltage | DC 12V |
| Operating voltage | 9V ~ 16V |
| Operating speed | 30?/h ~ 225?/h |
| Sensible distance | 30m (Sedan) |
| Curvature radius | Start : More than 100m/30km/h Stop : Less than 70m |
| Frequency | 24 GHz |
| Numbers | 2EA (Master 1EA, Slave 1EA) |
Components and Components Location
Components
1. Blind Spot Detection (BSD) Unit2. BSD switch3. Speaker4. BSD warning lamp5. Cluster
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Measure resistance between sensor signal terminal and sensor ground terminal.
5.
Check that the ...
Hyundai Elantra AD (2016-2020) Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 min), stop at a
safety location.
2. Connect the filling hose (3) directly into the compressor
3. Connect the other end of the filling hose (3) directly into the valve.
4. Plug the compressor power cord into the vehicle power outl ...
