Hyundai Elantra: Airbag Module / Side Airbag (SAB) Module Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and Operation

Description
The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.
   
•
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.
Side Airbag (SAB) Module Components and Components Location
Components 1. Side Air Bag (SAB) ...

Side Airbag (SAB) Module Repair procedures
Removal     • The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing the side airbag. 1. Disconnect ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: Where Are the Air Bags?
Driver's and passenger's front air bags Your vehicle is equipped with a Advanced Supplemental Restraint System (SRS) and lap/shoulder belts at both the driver and passenger seating positions. The SRS consists of air bags which are located in the center of the steering wheel, in the dri ...

Hyundai Elantra AD (2016-2020) Service Manual: Output Speed Sensor Repair procedures
Inspection 1. Using the GDS, check the input/output speed sensor waveforms. A. Turn OFF the ignition switch. B. Connect the GDS to the Data Link Connector(DLC) on the lower crash pad. C. Ignition "ON" & Engine "ON". D. Check the input/output speed sensor waveforms at high spe ...

© 2018-2026 www.helantraad.com