Hyundai Elantra: Driver Attention Warning (DAW) System / Resetting the System
- The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning (DAW) system.
- The Driver Attention Warning (DAW) system resets in the following situations.
- The engine is turned OFF.
- The driver unfastens the seat belt and then opens the driver's door.
- The vehicle is stopped for more than 10 minutes. - The Driver Attention Warning (DAW) system operates again, when the driver restarts driving.
System Setting and Operation
System setting
To turn ON the Driver Attention Warning (DAW) system, turn on the engine,
and then select 'User Settings → Driver Assistance → Driver Attention Warning
→ High sensit ...
System Standby
The Driver Attention Warning (DAW) system enters the ready status and displays
the 'Standby' screen in the following situations.
- The system is unable to collect data to monitor the driv ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Variable Intake Solenoid(VIS) Actuator Repair procedures
Removal and Installation
1.
Disconnect the vacuum hose (A).
2.
Remove the variable Intake solenoid (VIS) actuator connector (B) and actuator (C).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
3.
Install in the reverse order of removal. ...
Hyundai Elantra AD (2016-2020) Service Manual: Line Pressure Control Solenoid Valve Components and Components Location
Components Location
1. 26 Brake Control Solenoid Valve (26/B)2. 35R Clutch Control Solenoid Valve (35R/C)3. Underdrive Brake Control Solenoid Valve (UD/B)4. Overdrive Clutch Control Solenoid Valve (OD/C)5. SS-A Solenoid Valve (ON/OFF)6. Torque Converter Control Solenoid Valve (T/CON)7. Line Pre ...
