Hyundai Elantra: SRSCM / Occupant Classification System (OCS) Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Restraint / SRSCM / Occupant Classification System (OCS) Description and Operation

Description
In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Occupant Classification System (OCS). If the seat is occupied, OCS detects passenger presences status and send signal to SRSCM via CAN.
SRSCM recognizes the signal as 2(two) different classifications; that is, 1(Empty or small occupant with child restraint system), 2(Occupied with large occupant and small occupant).
With these signal, ACU determines whether it needs to deploy the PAB(Passenger Airbag) or not.
Occupant Classification System (OCS) Components and Components Location
Components 1. Occupant Classification System (OCS) Unit2. Occupant Classification System (OCS) Sensor Occupant Classification System (OCS) Unit ...

Occupant Classification System (OCS) Repair procedures
Removal Occupant Classification System (OCS) Unit 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front passenger seat assem ...

Other information:

Hyundai Elantra AD (2016-2020) Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 min), stop at a safety location. 2. Connect the filling hose (3) directly into the compressor 3. Connect the other end of the filling hose (3) directly into the valve. 4. Plug the compressor power cord into the vehicle power outl ...

Hyundai Elantra AD (2016-2020) Service Manual: Description and Operation
Description Body Control Module (BCM) function NoItemDescription1Washer Linked Wiper - If the washer switch is pressed ON for 0.06~0.2 second with the vehicle mode in IGN2, the wiper relay is turned ON 0.3±0.1 second after washer switch ON, and then the wiper relay is turned OFF 0.7 ...

© 2018-2025 www.helantraad.com