| Removal |
| 1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump") |
| 2. |
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).
|
| 3. |
Remove the head assembly (A) after releasing the cushion fixing hooks. |
| 4. |
Disconnect the fuel tube quick-connectors (B).
|
| 5. |
Remove the fuel sender (A) in the direction of an arrow.
|
| 6. |
Remove the reservior-cup (B) after releasing the fixing hooks (A).
|
| 7. |
Disconnect the ground (A).
|
| 8. |
Release the fixing hooks, and then remove the pre-filter (A) and the fuel pressure regulator (B).
|
| 9. |
Remove the fuel pump motor (A) in the direvtion ofan arrow.
|
| Installation |
| 1. |
Installation is reverse of removal. |
Fuel Pump Repair procedures
Fuel Pump Motor Repair proceduresHyundai Elantra AD (2016-2020) Owners Manual: Driver Assist System
Rear View Monitor
The Rear View Monitor will activate when the engine is running and the shift
lever is in the R (Reverse) position.
This is a supplemental system that provides a view of the area behind the vehicle
through the display audio or AVN screen while the vehicle is in the R (Reve ...
Hyundai Elantra AD (2016-2020) Owners Manual: Check Tire Pressure
â– Supervision cluster
You can check the tire pressure in the Assist Mode on the cluster. Refer
to the "LCD Display Mode" section in chapter 3.
A "Drive to display" message will appear for the first few minutes of driving
after initial engine start up. If the tire ...