Hyundai Elantra: Seat Belt Pretensioner / Emergency Fastening Device (EFD) Description and Operation
The Emergency Fastening Device (EFD) operates at the same
time with the Seat Belt Pretensioner when it satisifies the deployment
condition after a collision. It is an auxiliary equipment to prevent a
driver and passenger from breaking away by pulling the seat belt toward
the anchor side after a collision. It is located near the anchor on the
driver and passenger seat and is supported by two cables.
| • |
Never measure the resistance of the anchor pretensioner
directly, the current of the measuring device may cause unexpected
airbag deploy. |
|
Components
1. EFD(Emergency Fastening Device) System
...
Removal
1.
Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
2.
Remove the front seat.
(Refer to Body - "Front Seat Assembly")
3.
Remove the rea ...
Other information:
Hyundai Elantra AD (2016-2020) Owners Manual: Jump Starting
Jump starting can be dangerous if done incorrectly. Follow the jump starting
procedure in this section to avoid serious injury or damage to your vehicle. If
in doubt about how to properly jump start your vehicle, we strongly recommend that
you have a service technician or towing service do it ...
Hyundai Elantra AD (2016-2020) Service Manual: TPMS Sensor Repair procedures
Removal
1.
Remove the valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire changing machine .
•
The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep ...