Hyundai Elantra: Engine Control System / CVVT Oil Control Valve (OCV) Specifications

Specification
[Bank 1 / Intake] #1 , [Bank 1 / Exhaust]
Item
Specification
Coil Resistance (?)
9.4 ~ 10.4 [20°C(68°F)]

[Bank 1 / Intake] #2
Item
Specification
Coil Resistance (?)
10.8 ~ 12.8 [20°C(68°F)]

CVVT Oil Control Valve (OCV) Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...

CVVT Oil Control Valve (OCV) Schematic Diagrams
Circuit Diagram ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Troubleshooting
Standard Flow of Diagnostic Troubleshooting Notes With Regard To Diagnosis The phenomena listed in the following table are not abnormal. ConditionExplanationSystem check soundWhen starting the engine, a thudding sound can sometimes be heard coming from inside the engine compartment. This is bec ...

Hyundai Elantra AD (2016-2020) Service Manual: Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve terminals 1 and 2. Specification : Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. ...

© 2018-2024 www.helantraad.com