Hyundai Elantra: Engine Control System / Canister Close Valve (CCV) Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Engine Control/Fuel System / Engine Control System / Canister Close Valve (CCV) Description and Operation

Description

Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere during EVAP leak detection process.

Variable Intake Solenoid (VIS) Valve Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve terminals 1 and 2. Specification : Refer to "Specification" ...

Canister Close Valve (CCV) Specifications

Specification ItemSpecificationCoil Resistance (?)19.5 ~ 22.5 [20°C(68°F)] ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Front Wheel Speed Sensor Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub . Tightening torque: 107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft) • Be careful not to dam ...

Hyundai Elantra AD (2016-2020) Service Manual: Front Impact Sensor (FIS) Repair procedures
Removal • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s). • Do not turn the ignition switch ON and ...