Hyundai Elantra: Automatic Transaxle Cooling System / ATF Warmer Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Automatic Transaxle System / Automatic Transaxle Cooling System / ATF Warmer Description and Operation

Description

•	The ATF warmer is mounted on the valve body cover.

•	Engine coolant is used for circulating heat in order to heat and cool t he transaxle oil.

•	Rapidly elevates the transaxle oil temperature during the initial cold start of the engine.

•	Prevents over heating of the transaxle oil while the vehicle is moving.

•	Transaxle oil warm-up and cooling can be done with a single system.

•	The water coolant and oil are separate in order to exchange heat.

Description and Operation

Description • Engine coolant is used for circulating heat in order to heat and cool the transaxle oil. • Prevents over heating of the transaxle oil while the vehicle is moving. ...

ATF Warmer Components and Components Location

Components Location 1. Automatic transaxle2.ATF warmer3. Heater hose & pipe ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Troubleshooting
Troubleshooting SymptomSuspect areaRemedyCharging warning indicator does not light with ignition switch "ON" and engine off.Fuse blownCheck fusesLight burned outReplace lightWiring connection looseTighten loose connectionElectronic voltage regulatorDisconnect the voltage regulator to see if lig ...

Hyundai Elantra AD (2016-2020) Service Manual: Injector Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within the specification. Specification : Refer to "Specification" Removal 1. Turn the ignition ...