Hyundai Elantra: Instrument Cluster / Warning and Indicator lights
Information
Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention.
Supplemental Restraint System Warning Light
This warning light illuminates:
- Once you set the ignition switch or the Engine Start/Stop button to the
ON position.
- It illuminates for approximately 6 seconds and then goes off. - When there is a malfunction with the SRS.
In this case, have your vehicle inspected by an authorized HYUNDAI dealer.
Seat Belt Warning Light
This warning light informs the driver that the seat belt is not fastened.
For more details, refer to the "Seat Belts" in chapter 2.
Transmission Shift Indicator
Manual transmission shift indicator
This indicator informs which gear is desired while driving to save fuel.
Shifting up : ▲2, ▲3, ▲4, ▲5, ▲6
Shifting down :▼1, ▼2, ▼3, ▼4, ...
Parking Brake & Brake Fluid Warning Light
This warning light illuminates:
Once you set the ignition switch or the Engine Start/Stop button to the
ON position.
- It illuminates for approximately 3 seconds.
- It remains on if the p ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the specification.
Specification : Refer to "Specification"
...
Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner.
The procedure starts with an PCM(ECM) request for vehicle
specific data (PIN code: 6digits) from the tester. The "virgin" PCM ...
