Hyundai Elantra: Multifunction Switch / Specifications
| Specifications |
| Items | Specifications | |
| Rated voltage | DC 12V | |
| Operating temperature range | -40 ~ +176°F (-40°C ~ +80°C) | |
| Rated load | Washer | Washer : 6A (Motor load) |
Components and Components Location
Component
1. Steering column2. Multifunction switch3. Screw4. Clock spring
...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.
Verify that the intake actuator operates to the recirculation position w ...
Hyundai Elantra AD (2016-2020) Service Manual: Transaxle Control Module (TCM) Repair procedures
Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector as TCM side
check point. If the problem is found, repair it.
Specification: Below 1?
2.
TE ...
