Hyundai Elantra: Seat Belt Pretensioner / Seat Belt Pretensioner (BPT) Description and Operation

Hyundai Elantra AD (2016-2020) Service Manual / Restraint / Seat Belt Pretensioner / Seat Belt Pretensioner (BPT) Description and Operation

Description

The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce the severity of injury to the front seat occupants by retracting the seat belt webbing. This prevents the front occupants from thrusting forward and hitting the steering wheel or the instrument panel when the vehicle crashes.

(Seat belt pretensioner may be activated in side impact collisions if the vehicle has side airbag or curtain airbag.)

•	Never attempt to measure the circuit resistance of the Seat Belt Pretensioner (BPT) even if you are using the specified tester. If the circuit resistance is measured with a tester, the pretensioner will be ignited accidentally. This will result in serious personal injury.

Seat Belt Pretensioner (BPT) Components and Components Location

Components 1. Seat Belt Pretensioner (BPT) ...

Seat Belt Pretensioner (BPT) Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Separate the front seat belt (A) from the emergency fastening device. 3. R ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Fuel Tank Pressure Sensor (FTPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification : Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the rear seat. (Refer to Body ...

Hyundai Elantra AD (2016-2020) Service Manual: Rear Package Tray Trim Repair procedures
Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Use a plastic panel removal tool to remove int ...