Hyundai Elantra: Power Windows / Power window lock switch
The driver can disable the power window switches on the rear passenger doors by pressing the power window lock switch.
When the power window lock switch is pressed:
- The rear passenger control will not be able to operate the rear passenger power window
- Note that the front passenger control is still able to operate the front passenger window, and that the driver master control can still operate all the power windows.
WARNING
Do not allow children to play with the power windows. Keep the driver's door power window lock switch in the LOCK position. Serious injury or death can result from unintentional window operation by a child.
NOTICE
- To prevent possible damage to the power window system, do not open or close two windows or more at the same time. This will also ensure the longevity of the fuse.
- Never try to operate the main switch on the driver's door and the individual door window switch in opposite directions at the same time. If this is done, the window will stop and cannot be opened or closed.
Automatic reverse
If a window senses any obstacle while it is closing automatically, it will stop
and lower approximately 12 inches (30 cm) to allow the object to be cleared.
If the window detects the resistance w ...
Sunroof
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof
with the sunroof control switch located on the overhead console.
The sunroof can only be opened, closed, or tilted w ...
Other information:
Hyundai Elantra AD (2016-2020) Owners Manual: Air Bag - Advanced Supplemental Restraint System
1. Driver's front air bag
2. Passenger's front air bag
3. Side air bag
4. Curtain air bag
5. Driver's knee air bag
This vehicle is equipped with an Advanced Supplemental Air Bag System for the
driver's seat and front passenger's seats.
The front air bags are designed to ...
Hyundai Elantra AD (2016-2020) Service Manual: Brake Booster Repair procedures
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests.
1.
Run the engine for one or two minutes, and then stop it. If
the pedal depresses fully the first time but gradually becomes higher
when depressed succeeding times, the booster ...
