Hyundai Elantra: Airbag Module / Knee Airbag (KAB) Module Components and Components Location

Curtain Airbag (CAB) Module Repair procedures

Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. (Refer to Body - "Roof Trim Assembly") 3. Remove the curt ...

Knee Airbag (KAB) Module Description and Operation

Description The Knee Airbag (KAB) is installed inside the crash pad lower panel and protects the driver in the event of a frontal crash. The SRSCM determines if and when to deploy the KAB. ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Cylinder Head Repair procedures
Removal Engine removal is not required for this procedure.     • Use fender covers to avoid damaging painted surfaces. • To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature (20°C [68°F]) before removin ...

Hyundai Elantra AD (2016-2020) Service Manual: Idler Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the idler (A). Tightening torque : 39.2 ~ 49.0N.m (4.0 ~ 5.0kgf.m, 28.9 ~ 36.2lb-ft) 3. Install in the reverse order of removal. Inspection Check the idler for excessive oil le ...