Hyundai Elantra: General Information / Basic Service Symbols
General Information
| Symbol | Meaning |
| Do not reuse the part. Replace a new one. |
| Apply engine oil or transmission oil to the part. |
| Apply automatic transmission fluid (ATF) to the part. |
| Apply grease to the part. |
| Apply sealant to the part. |
General Tightening Torque Table
General Information
BOLT (Nominal diameter)NUT (Nominal diameter)
BOLT/NUT Thin screw Torque Nm (kg.m, Ib-ft) Nominal diameter. (mm)Pitch [mm (in.) ]4T8T10TM50.8 (0.031) 2.0 ~ ...
General Service Information
General Information
Protection of the Vehicle
Always be sure to cover fenders, seats, and floor areas prior to beginning work.
•
The support rod must be inserted into t ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Description and Operation
Description
Body Control Module (BCM) function
NoItemDescription1Washer Linked Wiper
-
If the washer switch is pressed ON for 0.06~0.2 second with
the vehicle mode in IGN2, the wiper relay is turned ON 0.3±0.1 second
after washer switch ON, and then the wiper relay is turned OFF 0.7Â ...
Hyundai Elantra AD (2016-2020) Service Manual: Rear Torsion Beam Axle Repair procedures
Removal
[Disc type]
1.
Loosen the wheel nuts slightly.
2.
Raise the vehicle, and make sure it is securely supported.
3.
Remove the rear wheel and tire (A) from front hub.
Tightening torque :
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
•
B ...
