Hyundai Elantra: Engine Control System / Accelerator Position Sensor (APS) Specifications

Specification
Accelerator
Position
Output Voltage (V)
APS1
APS2
C.T
0.7 ~ 0.8
0.325 ~ 0.425
W.O.T
3.98 ~ 4.22
1.93 ~ 2.17

Accelerator Position Sensor (APS) Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors ...

Accelerator Position Sensor (APS) Schematic Diagrams
Circuit Diagram ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt.   ...

Hyundai Elantra AD (2016-2020) Owners Manual: Floor Mat Anchor(s)
ALWAYS use the Floor Mat Anchors to attach the front floor mats to the vehicle. The anchors on the front floor carpet keep the floor mats from sliding forward. WARNING The following must be observed when installing ANY floor mat to the vehicle. Ensure to remove a protective film attached o ...

© 2018-2024 www.helantraad.com