Hyundai Elantra: Anti-lock Brake System (ABS) Warning Light, Electronic Brake Force Distribution (EBD) System Warning Light / Low Fuel Level Warning Light, Low Tire Pressure Warning Light

Low Fuel Level Warning Light

Hyundai Elantra. Low Fuel Level Warning Light, Low Tire Pressure Warning Light

This warning light illuminates:

• When the fuel tank is nearly empty. Add fuel as soon as possible.

NOTICE

- Low Fuel Level

Driving with the Low Fuel Level warning light on or with the fuel level below "E" can cause the engine to misfire and damage the catalytic converter.

Low Tire Pressure Warning Light

Hyundai Elantra. Low Fuel Level Warning Light, Low Tire Pressure Warning Light

This warning light illuminates:

For more details, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 6.

This warning light remains ON after blinking for approximately 60 seconds, or repeatedly blinks ON and OFF in 3 second intervals:

When there is a malfunction with the TPMS.

In this case, have your vehicle inspected by an authorized HYUNDAI dealer.

For more details, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 6.

WARNING

Safe Stopping

Charging System Warning Light, Engine Oil Pressure Warning Light
Charging System Warning Light When this warning light illuminates while the engine is running, the battery is not being charged. Immediately turn OFF all electrical accessories. Try not to use ...

Forward Collision Avoidance Assist Warning Light, Lane Keeping Assist (LKA) System Indicator Light
Forward Collision Avoidance Assist Warning Light (if equipped) This warning light illuminates : When you set the ignition switch or Engine Start/Stop button to the ON position. - It illuminat ...

Other information:

Hyundai Elantra AD (2016-2020) Service Manual: Muffler Components and Components Location
Components 1. Front muffler2. Catalytic converter & center muffler assembly3. Main muffler4. Gasket5. Hanger ...

Hyundai Elantra AD (2016-2020) Service Manual: Front Washer Motor Repair procedures
Inspection Front Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.     • Before filling the reservoir tank with water, check the filter for foreign material or contamination. if necessary, clean the filter. ...

© 2018-2025 www.helantraad.com