Hyundai Elantra: Seats / Front Seats
WARNING
Take the following precautions when adjusting your seat:
- NEVER attempt to adjust the seat while the vehicle is moving. The seat
could respond with unexpected movement and may cause loss of vehicle control
resulting in an accident.
- Do not place anything under the front seats. Loose objects in the driver's
foot area could interfere with the operation of the foot pedals, causing an
accident.
- Do not allow anything to interfere with the normal position and proper
locking of the seatback.
- Do not place a cigarette lighter on the floor or seat. When you operate
the seat, gas may exit out of the lighter causing a fire.
- Use extreme caution when picking small objects trapped under the seats
or between the seat and the center console. Your hands might be cut or injured
by the sharp edges of the seat mechanism.
- Make sure that the seat is locked in place after the adjustment. If not,
the seat might move unexpectedly resulting in an accident.
CAUTION
To prevent injury:
- Do not adjust your seat while wearing your seat belt. Moving the seat
cushion forward may cause strong pressure on your abdomen.
- Do not allow your hands or fingers to get caught in the seat mechanisms
while the seat is moving.
Adjusting the seats so that you are sitting in a safe, comfortable position plays
an important role in driver and passenger safety together with the seat belts and
air bags in an accident.
WARNIN ...
The front seat can be adjusted by using the levers located on the outside of
the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wh ...
Other information:
Hyundai Elantra AD (2016-2020) Service Manual: Special Service Tools
Special Service Tools
Tool (Number and Name)IllustrationUse09546-26000Strut spring compressorCompression of coli spring09568-1S100Saperate the ball joint from the front alxe09546-3X100 Shock absorber lock nut removal toolUsed for remove the shock absorber lock nut.
...
Hyundai Elantra AD (2016-2020) Service Manual: Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Remove the steering column upper & Lower shroud.
4.
Remove the ignition switch (A) and disconnecting the Key Warning / immobilizer connector.
5.
...